aluminium plate
The aluminium plate has a good weldability, excellent ductility, high corrosion resistance and satisfactory durability. It is used for the manufacture of various parts, components, structures and facilities. Also, they are widely used in food industry and for manufacturing goods and household consumption, which is valued their lightness, ductility and corrosion resistance. Another area of application is air and mechanical engineering, nuclear power engineering and electrical industry.
We would like to highlight our aluminium plate, with good physical performance, flat surface and smooth edge , Suitable for both deep drawing and Spinning.
Specifications
| Alloy | Temper | Thickness | Width | Length |
|---|---|---|---|---|
| 1050 3003 2024 5005 5052 5754 5083 5086 6061 6063 6082 7075 | O H111 H112 H116 F T3 T4 T6 T651 | 4.5-220mm | 500-2250mm | 1000-6000mm |
Chemical Composition % Max.
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Zr | Other | Al | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Each | Total | ||||||||||||
| 1050 | 0.25 | 0.40 | 0.05 | 0.05 | 0.05 | – | – | 0.05 | 0.03 | – | 0.03 | – | 99.50 |
| 2017 | 0.20 -0.8 |
0.70 | 3.5 -4.5 |
0.40 -1.0 |
0.40 -0.8 |
0.10 | – | 0.25 | 0.15 | – | 0.05 | 0.15 | Remainder |
| 2024 | 0.50 | 0.50 | 3.8 -4.9 |
0.30 -0.9 |
1.2 -1.8 |
0.10 | – | 0.25 | 0.15 | 0.05 | 0.15 | Remainder | |
| 3003 | >0.60 | 0.70 | 0.05 -0.20 |
1.0 -1.5 |
– | – | – | 0.10 | – | – | 0.05 | 0.15 | Remainder |
| 5005 | 0.30 | 0.70 | 0.20 | 0.20 | 0.50 -1.1 |
0.10 | – | 0.25 | – | – | 0.05 | 0.15 | Remainder |
| 5052 | 0.25 | 0.40 | 0.10 | 0.10 | 2.2 -2.8 |
0.15 -0.35 |
– | 0.15 | – | – | 0.05 | 0.15 | Remainder |
| 5754 | 0.40 | 0.40 | 0.10 | 0.50 | 2.6 -3.6 |
0.30 | – | 0.20 | 0.15 | – | 0.05 | 0.15 | Remainder |
| 5083 | 0.40 | 0.40 | 0.10 | 0.40 -1.0 |
4.0 -4.9 |
0.05 -0.25 |
– | 0.25 | 0.15 | – | 0.05 | 0.15 | Remainder |
| 5086 | 0.40 | 0.50 | 0.10 | 0.20 -0.7 |
3.5 -4.5 |
0.05 -0.25 |
– | 0.25 | 0.15 | – | 0.05 | 0.15 | Remainder |
| 6061 | 0.40 -0.8 |
0.70 | 0.15 -0.40 |
0.15 | 0.8 -1.2 |
0.04 -0.35 |
– | 0.25 | 0.15 | – | 0.05 | 0.15 | Remainder |
| 6063 | 0.20 -0.6 |
0.35 | 0.10 | 0.10 | 0.45 -0.9 |
0.10 | – | 0.10 | 0.10 | – | 0.05 | 0.15 | Remainder |
| 6082 | 0.70 -1.3 |
0.50 | 0.10 | 0.40- 1.0 |
0.60 -1.2 |
0.25 | – | 0.20 | 0.10 | – | 0.05 | 0.15 | Remainder |
| 7075 | 0.40 | 0.50 | 1.2 -2.0 |
0.30 | 2.1 -2.9 |
0.18 -0.28 |
– | 5.1 -6.1 |
0.20 | – | 0.05 | 0.15 | Remainder |
Packing
